Tactrix Openport 2.0 ECU Flash Tool

Description

Tactrix Openport 2.0 ECU Flash Tool  is an industry-standard J2534 PassThru hardware interface designed for ECU reflashing, diagnostics, and data logging. It is most famously paired with the free EcuFlash software for tuning Subaru and Mitsubishi vehicles, but its versatile design allows it to work with a wide range of OEM and third-party software.

Core Capabilities

• J2534 PassThru: Acts as a bridge between your laptop and the vehicle, allowing you to use OEM-level software (like Toyota Techstream or JLR SDD) for dealer-level diagnostics and programming.

• ECU Reflashing: When paired with the free EcuFlash software, it can read and write to the ECUs of most newer Subaru and Mitsubishi vehicles to optimize performance or clear complex faults.

• Standalone Datalogging: Features a built-in microSD card slot, allowing you to log engine data while driving without needing a laptop connected.

• Voltage Control: Capable of applying 5V–25V to specific OBD pins, which is a requirement for reflashing certain older vehicle modules

Highlights:

1. The Openport 2.0+ combined with EcuFlash software.
The Openport 2.0+ is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles.
2. New full chip new module plan, fast high speed transfer and very stable function.
3. New PCB with inductance to increase voltage, suitable for tuning car under different voltages.
4. Field upgradable software 
5. Tactrix Openport 2.0 was excellently tested with Toyota/ Ford/ Mazda/ Jaguar/ Land Rover/ Mitsubishi/ Subaru
6. The Openport J2534 is also compatible with Mercedes Xentry Pass thru, VW Audi Skoda, Ford, Mazda software.
(We don't provide software and after-sale service support if you use other third-party software)
7. Tactrix Openport 2.0 is compatible work with PCM tuner Dongle.

Warm Notice:

There is a New version of 1444870_win software on the official website, don't install this new software with this Openport, otherwise will damage the unit!
The latest version of the USB driver can not be used! Please Only Use our CD's USB driver! Otherwise the product will be damaged!
A computer with Intel processor is strongly recommended. Better not use PC with AMD processors.
CD will maybe easily broken in shipping way, so if CD can't be readable, please contact us to get a free download link
Computer System Requirement: Windows XP/Win 7 32bits---CD Software request
DO Not connect the Internet when you use it otherwise device will cause device damage.
Close anti-virus programmer when run software.

Supported Protocols:

CAN 2.0
CAN/ISO15765 and K-line
KWP2000/dual K-line

Openport 2.0 Software List:

Openport 2.0+ECUFLASH
Techstream V9.30.002
TIS 8.30.023 Activation
Techstream V8.20.019
*VDF_L_DVD158_V5
*JLR158 License SW
SDD_DVD158.02
SPA_DVD158_V2
VDF_J_DVD158_V5
*SDD_DVD158_FULL

Tactrix Openport 2.0+ECUFLASH Specifications:

1. 72Mhz 32-bit processor
2. USB 2.0 full speed device (USB-A/Mini cable included)
3. J2534 Pass Thru support with Windows DLL
4. Able to apply GND or 5V-25V to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector
5. Able to log from Innovate Motorsports 2.5mm stereo MTS data bus
6. RGB status LEDs

Technical Specifications

What's in the Box?

• 1 x Tactrix Openport 2.0 Interface

• 1 x USB Connection Cable

• Software Disk