What are you looking for?

Honda 6Pin OBD2 Motorcycle Adaptor Cable

In Stock
UGX25,000 UGX15,000 -UGX10,000
  • Converts Honda 6-pin ports to standard OBD2.

  • Supports most OBD2 scanners.

  • Durable cable with stable data transfer.

  • Plug-and-play for fast diagnostics.

BUY NOW
ORDER ON WHATSAPP

Description

Honda 6Pin OBD2 Motorcycle Adaptor Cable is a diagnostic bridge used to connect standard 16-pin automotive OBD2 scanners or Bluetooth dongles to the proprietary 6-pin diagnostic connector found on modern Honda motorcycles and ATVs.

Key Purpose & Compatibility

  • The "Euro 5" Standard: This 6-pin cable is typically required for Honda motorcycles manufactured from 2020 onwards that comply with Euro 5 emission standards.

  • Bridging the Gap: It converts the motorcycle's specialized 6-pin port into a standard 16-pin female OBD2 port, allowing the use of common tools like the ELM327, Autel, or Launch scanners.

  • Supported Models: Widely used for the Gold Wing GL1800, Africa Twin (CRF1100), CBR1000RR, CMX 500 Rebel, and CB500 series.

  • Protocol Support: Specifically designed for modern CAN-Bus communication systems, though it also often supports older K-Line protocols.

Diagnostic Capabilities

When paired with a compatible scanner and app (like Motoscan or Torque), this cable enables you to:

  • Read & Clear DTCs: Identify and reset "Check Engine" lights and fault codes.

  • Live Data Monitoring: View real-time parameters such as engine RPM, speed, coolant temperature, O2 sensor data, and battery voltage.

  • Service Resets: Reset maintenance indicators like oil change reminders.

  • ECU Settings: Depending on your software, you may be able to adjust certain performance parameters or update ECU settings.

Technical Pinout & Specs

Feature Details
Typical Pin Mapping Pin 1: Ground | Pin 2: +12V | Pin 3: CAN High | Pin 4: CAN Low | Pin 5: K-Line
Operating Voltage Works with 9V – 16V vehicle systems
Construction High-flexibility ABS plastic with copper shielded wiring to block engine noise
Standard Length Approximately 30 cm to 35 cm

⚠️ 4-Pin vs. 6-Pin: Which do you need?

  • 4-Pin Cable: Generally used for Honda models from 2017 to 2019.

  • 6-Pin Cable: The standard for most models from 2020 and newer.

  • Pro Tip: Always locate your diagnostic port (usually under the seat or near the battery) and count the pins before purchasing, as some transitional models may vary.

WhatsApp QR Code

Scan to Chat with Us